I am a Chinese Engineer.
I want to find a new material to be used in fabrication of Sonotrode.
The Sonotrode is used in wire bonding so that a low CTE is prefered.
Please give me suggestion.
Thanks a lot!
Honestly I think that it will be difficult to find a completely new sonotrode material. From my list the materials with the lowest thermal expansion are the engineering ceramics but they're expensive and difficult to use as sonotrode materials.
Perhaps it would help if you listed the materials you've already tried, and why they didn't suit your needs.
HTH
Chris - PowerUltrasonics.com site owner, chief cook and bottle-washer.
Thanks for your reply!
we have tried Ti-6Al-4V.
Advantages: low density, high yield strength
Disadvantages: low modulus, low thermal conductivity, higher CTE
You know wire bonding need a very exact control so we want to find the materilas with very low CTE.
Could you explain why ceramics can not be used in horn?
Is it because it possesses a very low toughness?
Thanks again!
Yes, relatively low toughness is certainly a factor. Also cost, difficulty of machining and no threaded connections. Still, if you really need the low thermal expansion then it might be worth trying something like Syalon.
Chris - PowerUltrasonics.com site owner, chief cook and bottle-washer.
A new online ultrasonics components store has just opened at www.UltrasonicsWorld.com. Check their amazing prices for replacement ultrasonics components, fully compatible with the major manufacturers' originals at a fraction of the cost.
M.P. Interconsulting
Miodrag Prokic is an independent consultant, developer of new ultrasonics applications (such as ultrasonic cleaning in liquid CO2) and supplier of special ultrasonic systems for cleaning, sonochemistry and other applications. This is the new site I've just built for him, which includes a variety of technical articles and photos of modern ultrasonic cleaning systems.
Located in Neuchatel, Switzerland, with partner organisations in Russia and India, Progress Ultrasonics Group develops technology-intensive ultrasonic equipment for oil and gas condensate production, processing and transport.
In trials, oil beds in Russia and Romania demonstrated successful results with an overall average efficiency of 200% oil flow compared to normal (double the flow rate).
Hmm, tricky...
Hi bsli,
Honestly I think that it will be difficult to find a completely new sonotrode material. From my list the materials with the lowest thermal expansion are the engineering ceramics but they're expensive and difficult to use as sonotrode materials.
Perhaps it would help if you listed the materials you've already tried, and why they didn't suit your needs.
HTH
Chris - PowerUltrasonics.com site owner, chief cook and bottle-washer.
new materials for transducer
Thanks for your reply!
we have tried Ti-6Al-4V.
Advantages: low density, high yield strength
Disadvantages: low modulus, low thermal conductivity, higher CTE
You know wire bonding need a very exact control so we want to find the materilas with very low CTE.
Could you explain why ceramics can not be used in horn?
Is it because it possesses a very low toughness?
Thanks again!
Why not ceramics...
Yes, relatively low toughness is certainly a factor. Also cost, difficulty of machining and no threaded connections. Still, if you really need the low thermal expansion then it might be worth trying something like Syalon.
Chris - PowerUltrasonics.com site owner, chief cook and bottle-washer.
Horn material
You can use DC53 and harden it to RC52-54, that can take a good amplitude.
Poul
steel
Please, the best steel for making sonotrodos for welding of non-woven, now use aluminum 7075 but has much wear.
Can you help me?
thanks
j.freitas